- Posts
Replaced the throttle position sensor, fuel pump and o2 sensors. Car will start but won’t run unless foot is hard on the gas. Giving codes for tps( tried that) and a code 35( which is strange cause that’s for the turbo model) just can’t seem to diagnose the problem! Replaced fuel pump and it started up and ran for a couple of minutes but started the same problem again! Help!
Having to keep your foot in it to keep the car running is never a good sign. You seem to have replaced the usual parts that go bad. It could have a problem with not getting enough air in the mixture and opening the throttle bore keeps it running. If you keep setting TPS codes, even with a new part, there is still something wrong, whether it be wiring or a bad computer. I would keep looking in that direction for the main problem.
- You must be logged in to reply to this topic.