1993 GMC Sonoma idle problem

Viewing 5 reply threads
  • Author
    Posts
    • #16098 Reply
      Joshua mitchell
      Guest

      I’ve changed throttle positioning sensor fuel pump spark plugs map sensor injectors injector housing and when I give it gas it shuts off .

    • #16102 Reply
      Phil
      Guest

      Check for a large vacuum leak. Get the codes scanned to see if any are in history.

    • #16707 Reply
      ray marcus
      Guest

      engine light on looses power while driving no response to gas petal goes sometimes

    • #16704 Reply
      Tyler c
      Guest

      I just replaced my valve cover and ignition coil on my 2016 cruze limited..we were able to clear the check engine light with the code scanner and it ran no problems..however..when i start the car with the key the check engine light stays off…but when i use my auto start the check engine light comes on…do i need to reset my autostart because of the coil pack? Or is it something else that i could be missing?

    • #16752 Reply
      Patrick
      Guest

      I have a 1995 Chevy S10 extended cab with a 60/40 type seat. is there any other type of seat that will bolt right in.

    • #16763 Reply
      Allisen M Keith
      Guest

      My boyfriend has been working on his 2005 Trailblazer and he thinks he put the stabilizer bar in backwards, but the pins and links line up just fine. He is concerned as it is sitting closer to the bottom of the engine then the old one. Is he correct, or do you think he should flip it around? thanks much!

Viewing 5 reply threads
Reply To: 1993 GMC Sonoma idle problem
Your information:





<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">