2011 Ford F150 raptor transmission valvebody

Viewing 1 reply thread
  • Author
    Posts
    • October 9, 2017 at 10:33 am #16132
      Deena Alkaram
      Guest

      Hi, I bought new transmission valve body part # SK FL3P-7A100-AA
      The valve body has visual differences than the old one
      Is it ok to install it without any problems? trying to Rebuilt and replacing the valve body.

    • October 15, 2017 at 10:53 am #16142
      Harry
      Guest

      If there is obvious differences, then i would not try to install it. Even if it bolts up fine, if the inner workings are not the same it will not function properly and can cause more problems. If thats the case, now you have to remove it again and do the work all over again.

      You best bet is to go to the Fork dealer with the part number of the new one, ask if it fits your truck. It is possible there was a design change / part number change and everything is fine, but you need to be sure.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.