Chevy Cobalt Sway Bar Links Replacement

Viewing 1 reply thread
  • Author
    Posts
    • #16070
      Brian
      Guest

      Hello. I am attempting to replace the sway bar links on my Chevy Cobalt sway bar links by myself (I have very little experience performing main tenancy on cars). I have my both sides of the front end of my vehicle on jack stands, and have taken out both sway bar links, however, cannotfor the new links on.

    • #16084
      Anonymous
      Inactive

      Install the upper stud of the links first.
      Then you need to line up the holes to the lower studs of the links. You may need to use a large pry bar to move the sway bar into position. The sway bat is probably to low, so you need to pry it up to line up with the lower link bolt.Then, use a wrench on the link to hold the stud while tightening the nuts.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.